CyberData PoE Power Injector

CyberData PoE Power Injector - power injector eliminates the need for a Power over Ethernet hub.

The Power Injector eliminates the need for a Power over Ethernet hub. In typical installations, the Power Injector connects between a non-PoE hub and the CyberData paging device, providing in-line power to the Category 5 Ethernet cable.

Specifications

• Input voltage: from 90 VAC to 264 VAC;
• Input signal frequency: from 47 Hz to 63 Hz;
• Starting current surge: less than 60A at 230VAC; cold start, 25o;
• Output voltage: +48 VDC;
• Output current frequency: 0.35 A;
• Works in green mode: < 0.5W (no load);
• Efficiency: 75%~85% depending on model;
• Support time: typically 16ms at rated load and 115VAC;
• Voltage protection: fixed;
• Short circuit protection: automatic recovery;
• Overcurrent protection: automatic recovery;
• Operating temperature range: from -20oC to 60; at temperatures above 40oC, a reduction in nominal parameters by 2.5% per degree;
• Cooling: free air circulation;
• Storage temperature: from -20oC to +85;
• EMI: FCC class "B" CISPR22 level "B";
• EMS: EN61000-4-2, -3, -4, -5,-6,-11;
• Safety: UL 60950-1, LPS, CSA C22.2 No. 60950-1, TUV EN60950-1;
• Device number: 010867;
• Dimensions: 54.0 X 110.0 X 33.0 (mm).
• Package:
  • Net weight: one device approximately 140 g.;
  • Gross weight: about 19kg/carton, 120 units in one carton
  • Box size (mm): 535 (L) x 489 (W) x 314 (H).
• Connectors:
  • Input voltage: IEC 320 C8: SNP-POEX, C6: SNP-POEX-3 (* X: 7/9/T);
  • Device connector: RJ45;
  • Ethernet connector: RJ45;
• Box color: black.