PePWave True Address Gateway TPW-100

By providing the existing subscriber gateway with the correct end-user layer-2 identification, PePWave TAG provides a drop-in solution to overcome this issue without any changes to the providers' existing network.

• True MAC Address Identification - TAG enables MAC address identification by restoring the true MAC address information of each individual end-user.
  
• Individual Customer Access Control - TAG allows WISPs to control the network access of each individual end-user in hospitality, convention, and hotspot areas.
  
• Ease of Deployment - TAG interfaces with the centralized Access Gateway. It can be drop-in deployed on an existing network infrastructure without any configuration changes to existing devices.
  
  

• Discover Wireless Users True Identity - TAG attacks limitations in the 802.11 protocol standards that cause the loss of users' MAC addresses when using Wi-Fi repeaters
  
• Collect Users True MAC Addresses - TAG receives user IP and MAC address information from one or multiple PePWave Mesh Connector devices
  
• Restore True MAC Addresses - TAG provides instantaneous MAC address translation and restores users true MAC addresses as traffic passing through
  
• Transparent Operation and Deployment - TAG works as a transparent layer-2 device and requires minimum configuration
  
• Drop-in Installation - Simply configure TAG for your network, and plug it in.
  
• Keep your configuration - TAG requires no configuration changes to your existing infrastructure
  
• Seamless Layer-2 Authentication - Extend Wi-Fi coverage to popular locations, without sacrificing control over your network
  
• Fully Compatible with Existing Subscriber Gateway - Since TAG transparently re-writes network packets before the subscriber gateway, the gateway only sees the correct identification
  
• Layer-2 Authentication - Mesh connector relays each end-users layer-2 information to TAG before the information is lost in transit, allowing for true Layer-2 authentication
  
• Enable cost effective coverage enhancement - TAG helps reduce the cost of a true indoor wireless experience
  
• Make mesh make sense - Mesh Connector and TAG work with your existing Wi-Fi mesh to extend wireless coverage beyond the street level to popular indoor locations

Appearance
Hardware Specifications
Models	TAG 100	TAG 380
WAN Interfaces	1 Fast Ethernet Port	1 Fast Ethernet Port
LAN Interfaces	4-Port Fast Ethernet Switch	1 Fast Ethernet Port
Throughput	20Mbps	150Mbps (bi-directional)
Power Adapter	Universal 100-240VAC	Universal 100-240VAC
High Availability
Form Factor and Miscellaneous
Dimensions	243(W) x 159(D) x 32(H) mm 9.57" x 6.25" x 1.26"	426(W) x 230(D) x 43.5(H) mm 16.8” x 9.1” x 1.72”
Rackmount Chassis (1U)
Weight	0.6 kg (1.2 lb)	3.5 kg (7.6 lb)
Operating Environment	Temperature: 0°C to 50°C / 32°F to 122°F Relative Humidity: 10% to 90% (non-condensing)	Temperature: 0°C to 40°C / 32°F to 104°F Relative Humidity: 10% to 90% (non-condensing)
Warranty
Certifications	FCC, CE, RoHS