CyberData VoIP Paging Amplifier

CyberData VoIP Paging Amplifier - VoIP paging amplifier from CyberData, compatible with SIP, supports PoE Ethernet, IGMP.

The CyberData SIP-based VoIP PA amplifier provides a simplified method of operating a pendant IP PA system for both new and legacy installations. The amplifier provides direct drive for a standard horn loudspeaker and includes an output connector for connection to an external amplifier. The interface is compatible with most SIP-based IP PBX servers that comply with SIP RFC 3261. In non-SIP-based environments, the speaker amplifier can be configured to listen to multicast addresses and port number combinations to form paging zones.

Key product features

• Compatible with SIP (RFC 3261);
• Dual-speed 10/100 Mbps;
• Web-based, upgradable hardware and software;
• Power over Ethernet enabled;
• IGMP;
• Direct speaker drive;
• Output connector.

Specifications

• Ethernet I/F: 10/100 Mbps;
• Power consumption: PoE 802.3af or 110-230VAC PS;
• Protocol: SIP RFC 3261;
• Payload types: G711;
• Regulatory Compliance: FCC Class B, UL 60950, CE;
• Warranty: 2 years - limited;
• Dimensions: 1.26" x 9.45" x 3.13";
• Device number: 010965;
• Output power:
  • Output power with one speaker at 8 Ohm - up to 8 Watts;
  • With external PoE power supply (Part #010867) and one 8 Ohm speaker, the output power is up to 10 Watts;
  • With an external PoE power supply (Part #010867) and two 8 Ohm speakers connected in parallel, the output power is up to 20 Watts.
• Line failure
  • Output signal amplitude 2.0 VPP max.;
  • Output signal level +2dBm nominal;
  • Total harmonic distortion 0.5% max.