CyberData VoIP Paging Gateway

CyberData VoIP Paging Gateway - CyberData's multicast gateway provides cost-effective access from analog telephone systems to VoIP paging systems.

CyberData's Multicast Gateway provides cost-effective access from analog telephone systems to VoIP public address systems.

The FXS interface of the multicast gateway is designed to use the FXO port of analog PBX systems, or to use non-SIP based IP telephone systems to support VoIP paging systems for CyberData speakers. An optional converter module can be used to obtain analog audio signals directly from line level audio sources.

The web-based graphical user interface allows the user to set up subsets of group addresses for the paging speaker and to enable the Dial Tone Multi-frequency (DTMF) capability when using a zoned paging system. The multicast gateway allows the configuration of up to 99 different zones when using CyberData VoIP paging systems.

The gateway is powered by PoE 802.3af – no external power source is required.

Key product features

• Dual-speed 10/100 Mbps;
• Notification for up to 99 zones;
• Web based configuration;
• Upgradable web databases;
• Power over Ethernet;
• Small dimensions.

Technical specifications

• Ethernet I/F: 10/100 Mbps;
• Power consumption: PoE 802.3af or 48VDC;
• Payload types: G711;
• Regulatory Compliance: FCC Class B, UL 60950, CE;
• Dimensions: 6.11"L x 4.05"W x 1.15"H;
• Warranty: 2 years limited;
• Device number: 010972.

Parameters

• Dual-speed: 10/100 Mbps;
• Reconfigurable tone line signal to zone controller;
• Web based configuration;
• Web-based, upgradable hardware and software;
• Power over Ethernet (PoE 802.3af) is enabled;
• Takes up little space;
• Internet Group Management Protocol (IGMP).