IP PBX OpenVox IX132

IP PBX OpenVox IX132 is an IP PBX (IPPBX) created on the asterisk platform for small and medium businesses and is designed for installation in a server cabinet.

OpenVox upgrades the 3rd generation IP PBX IX130 to IX132 based on the recently released embedded motherboard IPC120. IP PBX OpenVox IX132 is based on the asterisk platform for small and medium businesses. With the comprehensive solution OpenVox IX132 users can easily set up a combined IP PBX (IPPBX) at a low cost. OpenVox IX132 is a standard 1U device 19” wide, designed for installation in a server cabinet. Thanks to this, users can integrate up to 2 pieces of OpenVox PCI-E telephone cards in any combination of analog, BRI, PRI, GSM or transcoding interfaces. The new device not only retains the creative modular design, but also features an upgraded dual-core 1.86 GHz Intel processor that supports up to 4 E1 compared to 2 E1 in IX130. The upgrades allow IX132 to provide the system with an additional hardware RAID 1 function that improves data backup. In addition, the mini PCI-e to USB raiser card allows users to connect the device easily and safely. The HDD pocket provides the ability to hot-swap the storage device. So when RAID1 is set, users can see the status of the storage devices in the web interface and easily replace the spare hard drive at any time without opening the device. What’s more, IX132 provides two flexible power supply methods: internal and external, you can choose which one to use to power on IX130. OpenVox IX132 IP PBX supports comprehensive protocol processing, including SIP, H.323 on the IP side and BRI, PRI, SS7, GSM, as well as several other transcoding in the CPE. The IX130 IP PBX is equipped with Elastix, PBX in a FlashTM or trixbox IPPBX software.
Technical specifications:
CPU: 1.86GHz Intel Atom Dual core D25501 M L2 cache, 64 bit instructionDRAM: 2 GB DDR3 SDRAM,Storage: 1 SATA slot, 1 mSATA connector2 USB 2.0 ports2 Ethernet ports (1000Mbps)2 PCIe slots for phone cards and other connections1 mini PCI-E expansion slot16 Mbit flash for AMI BIOSVoltage range: 12V DC 1 VGA port (DB15) for connecting a monitorRack/wall mountFirmware: AMI_UEFI BIOSDimensions: 44cm × 4.5cm × 30cmWeight: 5200g (excluding phone cards)