Digital 8E1 PCI Card OpenVox DE830P

Digital 8E1 PCI card OpenVox DE830P is the most advanced, cost-effective and digital card with PCI interface, support for 8 ports and built-in Octasic Hardware Echo Cancellation Module, which has the highest performance and voice quality over two ports T1, E1 and J1.

The OpenVox DE830P is the most advanced eight-port high-quality card in the open source community. The card supports up to 256 channels in E1 mode or 192 channels in T1/J1 modes with a choice for the entire card or each port. The OpenVox DE830P is a digital PCI card based on open source code with a built-in Octasic Hardware Echo Cancellation Module. The most innovative technologies provide the ability to customize the hardware interrupt frequency, which allows you to reduce the processor load by up to 70% and adjust the number of interrupts to avoid conflicts. The DE830P supports standard telephony and data protocols, including Primary Rate ISDN (both North American and European standards), PPP, Cisco, HDLC and Frame Relay data transmission. The DE830P is compatible with all available motherboards. OpenVox DE830P works with Asterisk, Elastix, FreeSWITCH, PBX in a Flash, trixbox, Yate and IPPBX/IVR, as well as Open Source PBX, Switch, IVR, and VoIP gateway applications. OpenVox DE830P is currently the most powerful board for connecting an office telephone station to high-quality communication channels, with the highest performance and voice quality.
Application areas: VoIP-based services Complex IVR (Interactive Voice Response) systems "Meet-Me" conferences Telephone card platforms VoIP gateways with support for SIP, H.323 and IAX PBX/IVR services
Specifications: Eight T1/E1/J1 ports Built-in echo cancellation module based on Octasic processor Half-length PRI card RJ48 connectors Low profile FPGA design, with firmware expansion Power: 3.6W minimum, 4.9W maximum at 3.3 V or 5 V Operating temperature: 0 ° C to 50 ° C Storage temperature: -40 ° C to 125 ° C Dimensions: 2U form factor: 12 * 6.4 * 1.8 cm Weight: 107 g