Linksys SPA8000

Linksys SPA8000 - ATA adapter with 8 analog ports ( FXS ). 8 configurable lines, up to 16 active calls, 3-way conference capability.

Linksys SPA8000 is a richly functional automatic telephone exchange (PBX) for small and medium-sized businesses that allows for limited VoIP telephony capabilities and broad Internet access.
Linksys SPA8000 is an ideal solution for businesses, telecom operators and providers providing VoIP telephone services. 8 customizable lines, up to 16 active calls, possibility of 3-party conferences. You can expand and improve the capabilities of existing analog phones and other communication methods. Installed by the client, configured and maintained by the provider, SPA8000 devices convert the voice stream into packets for transmission over an IP network, exploiting expanded standards for voice transmission and information for reliable voice transmission and dispatch fax


The ATA adapter has 8 analog ports (FXS) from Cisco (Linksys). SPA8000 is a reliable solution for connecting analogue telephone with VoIP network. The device, without a doubt, is highly desirable due to its low price, reliability and rich functionality.

The frame is made of metal, on the front panel it is possible to show the structure of the lines and trunks. For additional trunks, you can create a group of analog ports with a special number (account), then set up a rule for which input calls will be generated on this trunk (the Wikory rules in the Contact List row) on which analog ports calls will come and for what strategy will be followed by the line calls. Lines can be turned on before the trunk group, so that when the output lan-setup-for-trunk is clicked, the connection is made through the specified trunk. Trunks can be adjusted up to a point. In essence, the SPA8000 is the primary Linksys ATA adapter with a large number of ports. It is configured exactly the same as other ATA adapters of the SPA series. Ability to configure up to 8 independent FXS lines.

The SPA 8000 adapter offers two ways to connect analog ports:

1. Through Amphenol (RJ-21)
2. For help with one of the RJ-11 interfaces

The device has one WAN interface. Every day the router has a different AUX port.
Place the device in a robot, then wrap it and place it in an isolated place.
In the box:
Attachment.
Brochure "Swedish start".
Patch cord.
External life adapter.

Features: 8 analog ports for connecting fax machines or telephones.
Possibility of up to 16 one-hour chimes.
All independent ports that can be configured on various VoIP clients.
Additional services:
# Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
# Caller ID with Name/Number (Multi-national Variants)
# Caller ID Blocking
# Call Forwarding: No answer, Busy, All
# Do Not Disturb
# Call Transfer
# Three-way Conference Calling with Local Mixing - Up To 8 Simultaneously
# Message Waiting Indication - Visual and Tone Based
# Call Return
# Call Back on Busy
# Call Blocking with Toll Restriction
# Delayed Disconnect
# Distinctive Ringing - Calling and Called Number
# Off-hook Warning Tone
# Selective / Anonymous Call Rejection Voice IVR menu for configuring the device.
Fax: G.711 Pass Through or Real Time Fax over IP via T.38 Screenshots:

Status of the line, one of the lines and the trunk are configured:

WAN and LAN settings:

As can be seen from the screenshots, all configuration and statistics pages are one to one similar to other adapters of the SPA series: 2102, 3102 and PAP2T.
So it’s easy to know about the utility for configuring the ATA adapter SPA8000 Configuration Wizard. It is a system of dialog windows. Works under Windows controls . There is currently no Russification until the utility. The utility allows you to configure the SPA 8000 of any computer with clicks, and also create connections with the IP PBX SPA 9000.
After configuring the SPA 8000 with the Configuration Wizard utility, it is impossible to deny access to the web interface after trying to explicitly allow access through the IVR menu of the SPA 8000!