Digium TDM814E

Digium TDM814E - 8 port modular analog PCI 3.3/5.0V card with 1 Station and 4 Trunk interfaces and HW Echo Can

Digium TDM814E - PCI card with analog ports FXS, FXO.

Digium TDM814E: TDM800P + (1) S110M Single FXS Module + (1) X400M Quad FXO Module + echo cancellation module.

Wildcard TDM800P is a half-size, PCI 2.2 compliant card for connecting analog telephones and PSTN lines to a server or PC. It supports various combinations of FXS or FXO modules for 8 different connections.

The TDM800P board is equipped with 8 two-wire RJ-11 interfaces on one PCI bracket. This eliminates the need for multiple brackets, external cables or splitters. Thus, when connecting the TDM800P, you will avoid using multiple devices, cable clutter and other inconveniences.

The Digium Wildcard TDM800P has two modules connection blocks. Each module block supports up to 4 analog interfaces. The block can be filled with either one Digium® quad analog module (FXS - S400M, FXO - X400M), or two Digium® single modules (FXS - S110M, FXO - X100M), allowing you to create various port configurations.

The Digium TDM800P card can be used with Digium's High Performance Echo Canceler (HPEC), a commercially viable, high-quality echo cancellation solution. Digium HPEC provides software-based ITU G.168 compliant echo cancellation (16ms to 128ms) for selectable near-ends.

Using this card with Digium Asterisk® software, a standard PC configuration and Linux® OS, you can create your own SME or SOHO IP telephony enterprise to meet the needs of small and medium-sized companies at the most competitive prices.

Note: FXS modules require a free 12V connector from the server power supply to operate. It is not required for FXO modules to operate.

The TDM kit designations are as follows: TDM8 XYB, where "TDM8" means that this is a Digium Wildcard TDM800P, "X" defines the number of FXS mezzanines, "Y" defines the number of FXO mezzanines, "B" means that this is a kit.