Linksys SFE1000P

8-port 10/100 Ethernet switch with PoE power supply

Linksys One-Ready , secure, reliable, ceramic Ethernet Interconnected with PoE

The SFE1000P is an 8-port fully 10/100 Ethernet switch with 2 Gigabit fiber or fiber interfaces for connecting to the lifeline core. This is Linksys One-Ready, which allows you to choose between Linksys One and not Linksys One. Its smartness, small size and fanless design make it ideal for small offices, conference rooms or gyms.

For drone-free surveillance or Voice Over IP (VoIP) communications, the SFE1000P supports the IEEE 802.3af standard for PoE. With automatic detection, the PoE control circuit automatically detects the end devices in front of the power supply. (PoE surrounding a fixed 10/100 Base-T/TX port.) The device can provide a maximum output of up to 15.4 W per 4-port PoE port, or up to 7.5 W per 8-port PoE port simultaneously. The device will ensure that the skin port is not overexposed or short-circuited. LED indicators indicate the connection to the skin PoE port.

With the advanced QoS and traffic management features offered by the SFE1000P, video and data can be prioritized to ensure clear and reliable voice communication. The intuitive, secure interface of the server allows you to easily configure QoS parameters, as well as other enhanced security features and characteristics, resulting in an optimized, more secure network.

Linksys One combines data and low-cost VoIP services with add-ons and other business services in one simple solution for small businesses. Because the SFE1000P is Linksys One-Ready, it can be easily integrated into Linksys One for data or data/voice measurements. Linksys One technology for automatic and self-configuration. Once connected, the Linksys One service router will open the SFE1000P, automatically configure it and make it available to other users.
Features of Linksys SFE1000P

* 8 - 10/100 inclusions of RJ-45 ports deliver up to 200 Mbps throughput per port
* 2 - 10/100/1000 inclusions of RJ-45/Mini-GBIC combination ports
* PoE on 10/100 ports set to IEEE 802.3af maximum 15.4 W per port for up to 4 ports or 7.5 W per port for 8 ports
* 5.6 Gbps non-blocking, save-and-forward bridging mechanism
* Simplified QoS management is enabled via methods using 802.1p, Diffserv or GS traffic prioritization characteristics
* WebView control allows you to switch settings and monitoring from a standard web browser
* Securely remote networking through the switch via SSH and SSL of the stolen edge channel protocols
* 802.1q based VLAN networks allow network segmentation to improve productivity and security
* Private edge VLAN will simplify isolation layers for guest connections or stand-alone boundaries
* Automatic configuration of the VLAN network through a number of jumpers via the GVRP / GARP protocol
* Automatic MDI / MDIXdetection support
* Koristuvach / Merezha portlevel security for additional 802.1x authentication and MACbased filtering
* Increased data throughput (up to 8x) and connection with Link Aggregation Control Protocol (LACP)
* The limit of capabilities has been expanded, including a gate vise to control the fluidity of data flow in and out of the port
* Ensures a wide range of address transfers and fights chains
* Mirror ports for non-invasive monitoring of traffic interference
* Jumbo support frame - up to 1632 bytes
* Support SNMP v1, v2c, and v3
* I will replace the stand with the supplied mounting stand

Linksys SFE1000P Specifications

* Model number
about SFE100P
* Standards
About IEEE 802.3, IEEE 802.3u
* Porti
O 8 RJ-45 connectors for 10BASE-T and 100Base-TX
O 2 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 2 SFP slots
About console port
about Auto MDI / MDI-X
about Auto-negotiate/Manual setup
* Buttons
Not about
* Light-emitting diodes
10/100 about Link / Act, PoE, 2 Giga Link / Act, speed, systems
* Web interface of koristuvach
about Introducing a web interface for a manual browser-interface (HTTP / HTTPS)
* SNMP
about SNMP version 1, 2, c and 3 with support
* SNMP MIBs
about RFC1213 MIB-2, RFC2863 MIB interface, RFC2665 Ether MIB type, RFC1493
about Mist MIB, RFC2674 extended Mist MIB (P-mist, Q-mist), RFC2819
about RMON MIB (1,2,3,9 groups only), RFC2737 Entity MIB, RFC 2618 RADIUS
Client about MIB, RFC 1215 pastes, as well as private MIB PoE
* Remote monitoring (RMON)
About the implementation of the RMON software agent supports RMON groups (history, statistics, alarms, etc.) for more effective management, control and analysis)
* Software updates
about web browser update (HTTP) and TFTP
* Mirror ports
The connection to the port can be mirrored, to another port for analysis by a boundary analyzer or an RMON probe.
* Other management
about Traceroute
about hijacked sockets (SSL)
About Secure Shell (SSH)
about RADIUS
about SSL security for the web interface
about DHCP client
about BootP
about SNTP
about Xmodem update
Cable about diagnostics
about PING
about the Telnet client (SSH will provide support)
* Security
about 802.1x IEEE 802.1x - RADIUS authentication, MD5 encryption
about access control lists (ACL), Drop or exchange of speed based on the device and assignment of IP or MAC addresses, protocol, TOS / DSCP, ports, VLAN and Ethertype
* Network type:
about UTP CAT 5 or more briefly, for 10BASE-T/100BASE-TX
about UTP CAT 5e or better, for 1000BASE-T


Linksys SFE1000P Package Contents:

* One SD216 16-Port 10/100 Switch
* One life adapter
* One instruction from the customer
* One Registration card


Linksys SFE1000P Vaga: 7.00 kg