Portech MV-372 is a dual-channel VoIP GSM gateway that supports SIP, Caller ID, Caller ID, Speed Dial, SMS receiving and sending, call routing from the GSM network (MOBILE → LAN) and from the local network to the GSM network (LAN->MOBILE).
VoIP GSM gateway Portech MV-372 optimizes the work of the telephone network, saves time and money spent on telephone communication. Portech MV-372 provides communication between cellular networks of the GSM standard and IP networks without the use of any additional equipment.
Calls from mobile phones are addressed to the gateway, and then via the Internet (SIP operator) they are transmitted to landline or mobile phones. (In this case, long-distance communication rates and mobile operator rates are replaced by SIP operator rates (Internet telephony), which are several times cheaper). Even cheaper communication is obtained when transmitting a call from one gateway to another via the Internet (without using a SIP operator).
Advantages of using VoIP GSM gateways Portech MV-372:
* Optimization of calls to mobile phones.
* Save time on dialing a number (approximately 2 times).
* Unloading city lines to receive incoming calls.
* Mobility – in case of office relocation, numbers are retained.
* Multichannel – the ability to redirect to other numbers (based on a hardware and software complex).
* Channel reservation – in case of internet interruptions, communication is carried out through gateways.
VoIP GSM gateways Portech MV-372 support SIP protocol and are fully compatible with all IP PBXs of well-known manufacturers, Cisco CallManager, AVAYA Definity, AVAYA IP Office, IP PBXs based on Asterisk, Nortel, Alcatel, Siemens, Panasonic TDE series and PBXs with installed IP boards, LG LDK PBXs, and other office PBXs with SIP protocol support, which makes it possible to quickly and efficiently provide office telephony. VoIP GSM gateways Portech MV-372 work with any telecom operator that provides telephony services using the SIP protocol.
Functions of VoIP GSM gateway Portech MV-372:
1. VoIP (SIP) - GSM routing
2. 50 rules for routing a call from a GSM network (MOBILE → LAN), and 50 rules for routing a call from a local network to a GSM network (LAN->MOBILE).
3. Caller ID function. Transfer of the Caller ID of the calling subscriber.
4. SIP standard (RFC2543, RFC3261) protocol for communication with other gateways or computers
5. Speed Dial function: Quickly dial a specific phone number by pressing one key on the phone.
6. 1-stage dialing mode. When calling the gateway number, the gateway immediately connects to a specific number.
7. 2-stage dialing mode. When dialing a gateway number, the gateway picks up the phone and waits for the number to be dialed further.
8. Possibility to make calls via a free channel. When making an outgoing call, the gateway monitors the SIM card occupation and calls via the first free channel.
9. Receiving and sending SMS via the web interface.
10. Receiving and sending SMS using AT commands.
11. Managing the Portech MV-372 GSM gateway via the Internet.
Specification:
* Protocols: SIP (RFC2543, RFC3261), TCP/IP: IP/TCP/UDP/RTP/RTCP, CMP/ARP/RARP/SNTP, DHCP/DNS Client, IEEE802.1P/Q, ToS/DiffServ, NAT Traversal, STUN, uPnP, IP Assignment, Static IP address, DHCP, PPPoE
* Codecs: G.711 u-Law, G.711 a-Law, G.723.1 (5.3k), G.723.1 (6.3k), G.729A, G.729A/B
Voice Quality, VAD, CNG, AEC, LEC, Packet loss
There are no reviews for this product.
No questions about this product.