SmartNode 4960 integrates legacy telephony forwarding for VoIP and data services with QoS and advanced-Voice VPNs. SmartNode 4960 consists of four T1/E1/PRI ports, two GigE ports, and supports 120 simultaneous VoIP calls, making it an ideal choice for low-cost, secure, prioritized communications.
Providing high-speed wireless connectivity between network cables and calls over IP, the SN4960 is ideal for PBX business trunking or corporate VoIP access. Featuring four software-configurable T1/E1/PRI interfaces, the SN4960 connects to a single module, the PBX and the network with 120 simultaneous calls using SIP, T1, E1 or PRI signaling. Two Gigabit Ethernet ports connect to the network for high-speed travel with its integrated QoS router. With its built-in CSU/DSU, any T1/E1 port can be selected as a WAN port for truly integrated voice and data access.
Like all SmartNode, the SN4960 features full-bandwidth voice with all industry standard CODECs, including low-bandwidth G.723/G.729. Business class Services supported with T.38 fax, fax bypass and modem bypass features.
SmartNode 4960 is designed for SIP TLS and SRTP via software upgrades. Exclusive DownStreamQoS™ and Voice-over-VPN features provide a clear advantage of uninterrupted and secure voice communication for any call today.
Voice Connectivity
Up to four software selectable T1/E1/PRI ports Signaling support:
ISDN DSS-1, NI-2, Q.SIG
CAS Distributed bit loop and ground start, E&M, immediate, wink, double wink.
SIPv2 and MGCP/IUA, H.323v4 ISDN AOC/ECT ISDN speech, audio & data (Fax Gr 4, UDI 64, RDI 64); ISDN supplementary service
Complete IP access router DHCP Client & Server Packet fragmentation Static firewall, NAT, NAPT RFC 1631
IP Quality of Service
Voice priority DownStreamQoS™ Traffic management, shaping and policing IEEE 802.1p, TOS, DiffServ labeling IEEE 802.1Q, VLAN tag insertion/deletion 4,096
Management
Web/HTTP, CLI with local console and remote Telnet access TFTP configuration & firmware loading SNMP MIB II and Product MIB Secure autoprovisioning for both firmware and unit/subscriber configuration Built-in diagnostic tools (trace, debug, call generator)
Power & Packaging
Power: 100 – 240 VAC (50/60 Hz) Power dissipation: 15W
Operating Environment
Operating Temperature: 32–104°F (0–40°C) Operating humidity: up to 90%, non condensing
Compliance
EMC compliance: EN55022 and EN55024 Safety compliance: EN 60950 CE compliance FCC Part 15 Class A; Part 68; CS-03
