Digium TE210P : 2 streams ISDN PRI (2 x E1), support T1, E1, J1, PCI 3.3V slot.
The Digium TE210P board (Wildcard TE210P) is a representative of the next generation of Digium technology, which increases system productivity due to the bus management function. The TE210P board supports the E1, T1 and J1 core, providing the required interface for a specific port or for the entire board as a whole. This function allows you to change the signaling between the T1, E1 and J1 devices, which makes it possible to connect inexpensive T1 channel concentrators to the E1 paths. As a result, the Digium TE210P board (Wildcard TE210P) increases the input-output speed by at least 10 times, the result is a significant reduction in the central processor requirement - allowing you to increase the number of boards on one server.
Digium has packaged the TE210P board with various versions of the Asterisk IP-PBX server. Also, the open-source payment driver code allows developers to continue working with the hardware, creating powerful programs for professional solutions. The addition of the IP-PBX Asterisk server, as well as the Digium hardware, disrupts the new IP-telephony standards in the telecommunications world. From traditional PBXs to IP telephony gateways, solutions based on Digium products represent the development of telecommunications in a new world of global communications.
The TE210P supports standard telephony and data protocols, including the Primary Rate ISDN voice family (standard North American and European voices), as well as PPP, Cisco, HDLC, and Frame Relay for data transmission.
The TE210P board supports only a PCI slot with a voltage of 3.3 V. This slot is essentially installed on all current motherboards and on 64-bit PCI architecture.
There are no reviews for this product.
No questions about this product.
