Digium TDM812B

Digium TDM812B - 8 port modular analog PCI 3.3/5.0V card with 1 Station and 2 Trunk interfaces

Digium TDM812B - PCI card with analog ports FXS, FXO.

Digium TDM812B: TDM800P + (1) S110M Single FXS Module + (2) X100M Single FXO Module.

Wildcard TDM800P is a cost-effective, PCI 2.2 card for connecting analog phones and PSTN lines to a server or PC. It supports different combinations of FXS or FXO modules for 8 different connections.

The TDM800P board is equipped with 8 dual-wire RJ-11 interfaces on one PCI bracket. This allows you not to interfere with the number of braces, external cables or splitters. Thus, when you connect the TDM800P, you will avoid the hassle of several devices, the purchase of wires and other inconveniences.

Before paying for the Digium Wildcard TDM800P, there are two blocks for connecting modules. The skin modular unit supports 4 analog interfaces. The unit can be filled with either one Digium ® quad analog module (FXS - S400M, FXO - X400M), or two Digium ® single modules (FXS-S110M, FXO - X100M), allowing different port configurations.

The Digium TDM800P board can be paired with Digium's High Performance Echo Canceller (HPEC) , a commercially available and high-quality solution for echo compensation. Digium HPEC will provide ITU G.168 software with high echo compensation (from 16ms to 128ms) for selected near ends.

Using a Vikorist board with Digium Asterisk ® software, a standard PC configuration and Linux ® OS, you can create an SME or SOHO IP telephony business to meet the needs of small and medium-sized companies. prices

Please note: for the operation of the FXS modules, a large 12 V socket is required from the server's life block. VIN is not required for the operation of FXO modules.

Decoding the smart values of TDM sets is available: TDM8 XYB, where “TDM8” means the same as Digium Wildcard TDM800P, “X” means the number of FXS mezzanines, “Y” means the number of FXO mezzanines, "B" means what to dial