Sangoma A102D is a digital voice board with PCI interface for two E1 channels with a hardware echo cancellation module and support for CAS and ISDN PRI signaling systems.
The Sangoma A102D PCI card is a digital voice card with a PCI interface for two T1/E1/J1 channels with support for CAS and ISDN PRI signaling systems.
The Sangoma A102D digital cards represent the next generation of Sangoma equipment designed to optimally process data and voice transmitted over T1 and E1 streams.
The Sangoma A102D PCI supports up to 60 telephone connections, providing full-duplex data transmission over two T1, E1 or J1 channels at 4096 kbps.
Sangoma boards allow you to take advantage of new hardware and software features as soon as they become available. The Sangoma A102D board, like all other boards in the Sangoma AFT family, supports in-service firmware updates.
The Sangoma A102D and Sangoma A102DE cards, with Octasic® DSP hardware and certified echo cancellation algorithms, provide telco-grade echo cancellation and improved audio quality in public and private telephone systems.
Technical specifications of Sangoma A102D:
* Intelligent hardware: Upgradable programmable gate array with multiple operating modes.
* T1/E1 and truncated T1/E1 stream, one HDLC channel per line.
* Power: 520 mA at +5 V
* Compatible with 32-bit PCI bus (5V and 64-bit (3.3V).
* Temperature range: 0 - 45 0C.
* All settings are made either programmatically or using BIOS.
* Software configuration of DSU/CSU.
* Line decoding: HDB3, AMI, B8ZS.
* Framing: CRC4, non-CRC4, ESF, D4.
* Clock mode: Normal, master device.
* Software controlled DSU/CSU test modes.
* Remote monitoring of the board and CSU/DSU operation.
* Dimensions: 2U form factor: 120mm x 55mm.
T1/E1 status signals:
* ALOSV: Loss of Signal alarm
* LOS: Receive Loss of Signal
* ALTLOS: Alternate loss of Signal Status
* OOF: Out of Frame
*RED: Telco Red Alarm condition
* AIS: Alarm Indication Signal
* OOSMFV: Loss of Signaling Multiframe
* OOCMFV: Loss of CRC Multiframe
* OOOFV: Out of Off-Line Frame
* RAIV: Receive Loss of Signal
* YEL: Receive Telco Yellow Alarm
Certificates:
FCC Part 15 Class A, FCC Part 68, CE
Operating systems:
• Windows® 2003, Windows XP, Windows Server 2008, Windows Vista.
• Linux (all versions, editions and distributions, starting from 1.0).
• FreeBSD
Supported protocols:
ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC.
There are no reviews for this product.
No questions about this product.
